Studio Cabling

Adapter cable, XLRf - Cinch, 3m length, 110 Ohm

A microphone cable consisting of a female XLR connector to a male XLR connector, equipped with silver contacts and spiral shielding.

The SC4 is a high-quality shielded adaptor, designed to allow microphones with a 3.5mm output to connect to TRRS smartphones and tablets.

Microphone cable 5 m, AWG 24, conductor construction: 28 x 0.10 mm, 85 Ohm/km, shielding of bare copper wires, conductor insulation: PE

Microphone cable, connector A: XLR 3 pole female, connector B: XLR 3 pole male, cross section: 0.22 mm², cross braided shield.

A professional, low-noise microphone cable for connecting dynamic or condenser mics to preamps, audio interfaces and effects.

Robust 0.3m TT patch cable from Mogami with Quad-Wire, colored rings & nickel-plated Bantam plugs.

A microphone cable consisting of a female XLR connector to a male XLR connector, equipped with silver contacts and spiral shielding.

60cm High flexible Mogami Neglex OFC cable; Bantam TT Phone <> Bantam TT Phone; balanced

Robust 0.45 m TT patch cable from Mogami with Quad-Wire, colored rings & nickel-plated Bantam connectors.

Robust 0.9m TT patch cable from Mogami with Quad-Wire, colored rings & nickel-plated Bantam plugs.

The Rode VXLR+ is a 3.5mm female TRS to male XLR adapter with conversion from 12-48V phantompower to 3-5V 'Plug in Power'. With this feature it is possible to operate microphones via XLR.

5m LAN cable, RJ45 plug etherCON RJ45, device connection and patch cable in patch panels

30 m microphone cable as a ring with 2 x 0.22 mm², PVC sheath and flexible design for studio and live use.

1x USB 3.2 Type-B socket 4x USB 3.2 Type-A sockets + 1x USB Type-A charging socket (5V, 2.4A)

A microphone cable consisting of a female XLR connector to a male XLR connector, equipped with silver contacts and spiral shielding.