Your Feedback

beyerdynamic MM1 Measurement Microphone

(12)
Item: PAH0001050-000
Enable Social Media
Each Beyerdynamic MM 1 microphone is supplied with a printout of an individually measured 0° frequency response curve.  All product info

€ 222.70 ca. Kč 5,710.92
incl. VAT
in stock
Standard Shipping  (10-15 business days)

Activate social media for sharing. Data will only be sent via social networks with your consent.

Product information beyerdynamic MM 1

Condenser measurement microphone for PA and studio analysis

  • Transducer principle: Capacitor (back electret)
  • Operating principle: Pressure transducer
  • Polar pattern: Omnidirectional
  • Frequency response: 20 - 20,000 Hz (50 - 16,000 Hz ± 1.5 dB)
  • Diffuse field equalised Field leakage transmission factor at 1 kHz (0 dB = 1 V/Pa) 15 mV/Pa (= -36.5 dBV) ± 1 dB
  • Nominal impedance: 330 ohm, nominal terminating impedance = 2.2 kohm
  • Max. Maximum sound pressure level at 1 kHz: 128 dB
  • S/N ratio related to 1 Pa: > 57 dB
  • A-weighted equivalent sound pressure level: approx. 28 dB(A)
  • Power supply: 12 - 48 V phantom power
  • Supply current: approx. 3.4 mA
  • Connector plug: 3-pin XLR
  • Dimensions: Length 133 mm Shaft diameter 19 mm Head diameter 9 mm
  • Weight without cable: 88 g
beyerdynamic MM 1 condenser measurement microphone with slim black housing and XLR connector

Condenser measurement microphone for PA and studio analysis

The beyerdynamic MM 1 is a high-quality electret condenser measurement microphone with omnidirectional polar pattern and calibrated field leakage transmission factor.

Neutral imaging

Thanks to the slim housing with the offset microphone capsule, the influence on the sound field is very low, so that pressure build-up at high frequencies is largely avoided. The linear frequency response ensures neutral imaging.

Field of application:

The MM 1 microphone was developed for calibrating PA and PA systems. In conjunction with a spectrum analyser, the sound pressure level of loudspeakers can be monitored in addition to frequency response measurements. The MM 1 is a valuable tool for analysing sound signals in research, development and industry.

Individually measured frequency response

Each microphone comes with a printout of an individually measured 0° frequency response.

    Manufacturer information
    beyerdynamic GmbH & Co. KG
    Theresienstraße 8
    74072 Heilbronn
    Germany
    info@beyerdynamic.de