Flame Bridge

Flame Bridge at a glance

Bridge from Flame is a Set consisting of two 2TE modules that form a cable bridge within a Eurorack case. The module duo is passive, so it requires no power. Each module is equipped with eight mono jack sockets; both are connected to each other inside the Case with an 80cm long ribbon cable. Bridge is useful wherever you want to avoid having to lay longer patch cables across the Case or even if the trigger sequencer is installed at the bottom left and the eightfold drum voice at the top right for accessibility reasons. In both cases, a short cable is used to patch from the source to the bridge and from the second bridge to the target module. This gives the Case a much tidier appearance and the feel does not suffer due to the module arrangement.