Your Feedback

Maag Audio Mäag Audio EQ4M

Item: REC0014749-000

Compare list
Recommend

Information on the disposal of old devices

6-band mastering equalizer based on the 6-band EQ NTI EQ3 with air band and sub EQ band All product info

We are happy to help you!

Export
export@musicstore.com
+49 (0)221 / 88 84 - 1610
+49 (0)221 / 88 84 - 2500

INTERACTIVE
CATALOGUE
MORE THAN 3.000
PRODUCT VIDEOS
Free Shipping
from 69 €
3 YEARS
WARRANTY
55.000 PRODUCTS
READY TO SHIP

Product information - Mäag Audio EQ4M

6-Band Mastering Equalizer

Dual channel with separate controls for both channels
AIR BAND with 6 frequency presets (2.5, 5, 10, 15, 20 & 40 kHz)
5 additional bands (2500, 650, 160, 40 and 10 Hz)
High transparency and presence in the upper frequency range
Separate sub EQ band
Up to 15 dB boost per band
Peak and signal LED indicators
Input control for down-regulating the input signal
1U rack form factor
2 XLR inputs and outputs
High headroom and low phase shift

Technical specifications

Frequency response: -2 dB, 10Hz & 75kHz
Nominal input impedance (XLR): 48 kOhm, balanced
Nominal output impedance (XLR): 50 ohms, balanced
Headroom: +29 dBu at 10 kOhm, +28.5 dBu at 600 ohms
THD + Noise: < 0.005%

Mäag Audio Equalizer at a glance:

The Mäag Audio EQ4M is a 6-band equalizer with one air band and five additional bands. It is powered by an internal power supply with +/- 18 V, has a maximum output level of +28.5 dBu and operates 600 Ohm load impedance. The unit measures only -2 db at the extremes of 10Hz and 75kHz - essentially a flat frequency response in audio.

Mäag Audio EQ4M 6-Band Mastering Equalizer

Function

Each channel of the EQ4M has six EQ band sections. They are divided into four fixed-frequency bell-shaped equalizer sections, a 2.5 kHz shelving equalizer section, and the air-band equalizer with selections of 2.5, 5, 10, 15, 20, and 40 kHz. The five frequency bands in the main section are: Sub or 10 Hz, 40 Hz, 160 Hz, 650 Hz and the 2.5 kHz shelving EQ.

All EQ sections have a boost/cut range of +15 dB and -4.5 dB with a centre position at 0 dB. The air-band section has its own bypass button, and there are separate hardwire bypass switches for each channel. Each channel also has an input attenuator with a range of 0 to -10 dB and a green LED for the signal present (-20 dBu) and a red LED that flashes at peak levels of +23 dBu.