Your Feedback

Schoeps PHS 48

Item: REC0001766-000
  • B-Stock
Schoeps PHS 48   Product Image
Enable Social Media
quick test of 48 V phantom powering (current) indication by a green LED The PHS 48 can be plugged into a microphone input or ...  All product info

This product is no longer available!
We are happy to help you!
Our team
Export
export@musicstore.com
+49 (0)221 / 88 84 - 1610
+49 (0)221 / 88 84 - 2500

Activate social media for sharing. Data will only be sent via social networks with your consent.

  • INTERACTIVE
    CATALOGUE
  • MORE THAN 3.000
    PRODUCT VIDEOS
  • Free Shipping
    from 69 €
  • 3 YEARS
    WARRANTY
  • 55.000 PRODUCTS
    READY TO SHIP

Product information - Test Plug PHS 48

quick test of 48 V phantom powering (current) indication by a green LED

The PHS 48 can be plugged into a microphone input or cable that carries 48 Volt phantom power, to verify that sufficient current is available to power a SCHOEPS microphone. According to the standards, a 48 V phantom powered microphone may draw a current of up to 10 mA per channel. SCHOEPS CMC 5, CMC 6 and CCM microphones actually need only 4 mA (ca. 5 mA if Active Accessories are used), so the PHS 48 tests for approximately this amount of available current at the required voltage level.

Any trim, gain, or volume controls should first be set to their minimum position, to avoid noise and potential damage. Then, while all other microphones are already connected the test plug is attached to the socket which is intended to power the SCHOEPS microphone. The green LED in the PHS 48 will light and remain lit if the test result is positive.

Connector: XLR-3M Dimensions: length: 53 mm, diameter: 19 mm Surface finish: nickel