Your Feedback

Behringer BM-12 Ring Modulator

Item: SYN0009340-000
  • Topseller!
Behringer BM-12 Ring Modulator Product Image
Enable Social Media
Analogue ring modulator with tremolo, sine wave oscillator, distortion, CV input and output – Moog MF-102 clone.  All product info

Product variations
€ 104.00 ca. HRK 781.04
incl. VAT
Available immediately

Activate social media for sharing. Data will only be sent via social networks with your consent.

Behringer BM-12 Ring Modulator

Analogue effects processor with sine-wave LFO, ring modulation and CV control

  • Clone of the Moog MF-102 Ring Modulator
  • Analogue ring modulator & tremolo effect
  • Sine wave oscillator with 2 frequency ranges
  • LFO with sine and square waveforms
  • Internal oscillator can be replaced by an external signal
  • Audio input with distortion
  • LEDs for level, LFO frequency & bypass on/off
  • Mono audio in & out
  • CV inputs for rate, amount, mix & frequency
  • CV output from the internal LFO
  • Carrier In & Out

Introducing the Behringer BM-12 RING MODULATOR

Cool metal & Dalek sounds with the BM-12 Ring Modulator

With the BM-12 Ring Modulator, Behringer presents a clone of the Moog MF-102 Ring Modulator from the popular MoogerFooger series. Behringer has succeeded in faithfully reproducing the distinctive sound of this classic in every detail. As a ring modulator, the effect imparts a metallic character to any signal you feed into it. Whether it’s a guitar, synth or drum machine, the results are, across the board, quirky, wild and experimental. If you use a microphone at the input, you’ll sound like the Daleks from Doctor Who. The internal oscillator can be replaced by an external signal; so there’s nothing to stop you, for example, from ring-modulating two individual outputs from a drum machine against each other. In Low mode, the effect spectrum shifts towards tremolo. It sounds absolutely brilliant with strings, chords and anything with a long sustain, but here too, experimentation is key! The LFO, with sine or square waveforms, modulates the oscillator’s frequency parameter, instantly producing those iconic effect sounds. The input stage is designed for line and guitar levels and can be overdriven; in most cases, this sounds very musical and has a harmonic character.

Control voltages for even more fun

The connections are the same as on the original: there are four CV/expression inputs for the parameters Rate, Amount, Mix and Frequency. This allows the parameters to be controlled via an expression pedal or by any control voltages from the modular system. The audio inputs and outputs are mono. Carrier Out routes the sine-wave oscillator to an external device; Carrier In replaces the internal oscillator with an external signal. The sine-wave or square-wave form of the LFO is output via LFO OUT and can thus serve as an additional modulation source for other instruments with a control voltage input.

Get More From the Behringer BM Series

Manufacturer information
Music Tribe DE1 GmbH
Otto-Brenner-Strasse 4a
47877 Willich
Germany
[email protected]

Features:

  • Manufacturer: Behringer
  • Distortion: Yes
  • Additional effects: Yes
  • Power Supply: Adapter, external
  • incl. Power Adapter: No
  • Width (cm): 14.8
  • Depth (cm): 19.7
  • Height (cm): 8.6
  • Weight (kg): 1.02
Behringer BM-12 Ring Modulator Product ImageBehringer BM-12 Ring Modulator
€ 104.00
€ 230.00
€ 198.50
€ 125.00
€ 104.00
€ 181.70

Compare with similar products