Ready to ship
55.000 Products
55.000 products
ready for shipment
Money Back
30 Day Return Policy
You have placed the following items into your shopping cart
Ready to ship
55.000 Products
55.000 products
ready for shipment
Money Back
30 Day Return Policy
Incredibly linear frequency response characteristics, the highest power handling of any comparable 15-inch neodymium transducer,the lower power compression. The LF15N401 uses a fibre loaded cone assembly along with a high excursion triple roll,constant geometry surround. This combination provides remarkable strength and a peak to peak maximum excursion of 52mm. The unique Dual-forced air venting system guarantee a very efficient voice coil ventilation for minimum power compression and higher power handling.
Features 4-inch, fiberglass inside/outside copper voice coil 1800W continuous program power handling 97 dB Sensitivity 35 Hz - 1.5 kHz Frequency range Dual-forced air ventilation and 15mm top plate for minimum power compression Dual spider design with silicon based dampening control Triple-roll surround and corrugated straight cone geometry
General Specifications Nominal Diameter: 380 / 15 mm/inch Rated Impedance: 8 Ohm Program Power: 1800 W AES Power handling capacity: 900 W AES Sensitivity: 97 dB Frequency Range: 35 Hz ÷ 1500 Hz Effective Piston Diameter: 340/13.4 mm/inch Max Excursion Before Damage (peak to peak): 52 / 2.1 mm/inch Minimum Impedance: 6.3 Ohm Voice Coil Diameter: 100 / 4 mm/inch Voice Coil Material: Copper Voice Coil Winding Depth: 25 / 1.0 mm/inch Number of layers: 2 Kind of layer: inside / outside Top Plate Thickness: 15 / 0.6 mm/inch Cone Material: No pressed pulp Cone Design: Straight Surround Material: Polycotton Surround Design: Triple roll
Thiele/Small Parameters DC resistance: 5.1 Ohm Mechanical factor: 5.8 Electrical factor: 0.23 Total factor: 0.22 BL Factor: 27.8 T · m Effective Moving Mass: 158 g Equivalent Cas air load: 160 liters Effettive piston area: 0.091 m² Max. linear excursion (mathematical): 8.8 mm Voice - coil inductance @ 1kHz: 2.5 mH Half-space efficiency: 2.64%
Mounting information Overall Diameter: 393 / 15.5 mm/inch Bolt Circle Diameter: 371-376 / 14.6-14.8 mm/inch Bolt Hole Diameter: 6.5 / 0.3 mm/inch Front Mount Baffle Cut-out: 354 / 13.9 mm/inch Rear Mount Baffle Cut-out: 354 / 13.9 mm/inch Depth: 158 / 6.2 mm/inch Volume occupied by the driver: 3.8 / 0.13 liters/ft³ Net Weight: 8.6 / 19.1 kg/lbs
RCF LF15N401, Woofer 15", 900 Watt RMS / 8 Ohm
RCF LF15X401, Woofer 15", 1500 Watt RMS / 8 Ohm
RCF MB15X351, Mid-Bass 15", 700 Watt RMS / 8 Ohm
RCF L15P540, Woofer 15", 500 Watt RMS @ 8 Ohm