The Laserworld tarm 2.5 FB4 is a professional show load system with full analog color modulation, a guaranteed output power of 2700 mW, a Pangolin FB4 network interface and the Pangolin Quickshow show laser software. The tarm 2.5 FB4 show laser projector is a full color white light laser system with full analog color modulation, pure diode placement and already integrated Pangolin FB4 Quickshow 'Max' network interface. The guaranteed optical output power is specified at 2700mW.
The projector has very good beam characteristics with a beam diameter of approx. 3.5 mm and a divergence of less than 1.0 mrad (full angle).
The laser power is tarm 2.5 FB4 very high: Red (750 mW / 638 nm), green (700 mW / 520 nm) and blue (1,500 mW / 450 nm) add up to a total power of over 2,500 mW after optics.
With 45 kpps at 8° ILDA and a maximum scan angle of 45° (@ 30 kpps) they are Scanner very fast and therefore also suitable for more complex graphic projections and professional applications.
Optionally available as upgrade: CT-6210H Scanner incl. LAS Turboscan driver with 60 kpps@8° ILDA and a max. scan angle of 60° (@35 kpps).
The housing of the tarm 2.5 is very robust and dustproof, so that no air circulates inside. This reduces the maintenance effort for the systems to a minimum.
The mounting bracket of the tarm two can be turned and thus allows a hanging as well as a standing mounting of the laser.
It is particularly Laserworld tarm 2.5 FB4 suitable for show laser applications in discotheques and bars and can be used by beginners as well as professionals.
The tarm 2.5 FB4 showlaser already has an integrated Pangolin FB4 interface. The Pangolin FB4 is a network interface available with Pangolin Quickshow or Pangolin BEYOND ( Pangolin BEYOND is available as a separate upgrade license). The Pangolin Quickshow is already included in the delivery. Thanks to this interface it is no longer necessary to use ILDA cables as a connection between the show laser and the control computer.
Functions of the Pangolin FB4 Quickshow 'Max' are
The integrated colour display offers various setting options
The Pangolin FB4 'Max' network interface contains the Pangolin Quickshow show laser software and offers the possibility to control the show laser via TCP / IP network, DMX512 or SD card.
Network control:
To do this, simply connect a network cable (CAT5) from a computer on which Pangolin Quickshow is installed (software can be downloaded from pangolin.com) to the network port of the Pangolin FB4 Quickshow.
DMX512 control:
To do this, simply connect a DMX cable (XLR 5pin) from a DMX console or DMX Interface to the DMX IN connector of the Pangolin FB4 'Max'.
SD memory:
The Pangolin software can be used to create content and then export it to the SD card (included). Now it is possible to output the content via the SD card. An additional computer is not required.