It is equipped with sub-bass loudspeaker driver of 29 cm in diameter, class D power amplifier 400W at 4Ohm mounted on the rear panel, there are also calibrated controls, protections, indicators, and the input/output terminals. SUB 10 is designed for operation in stereophonic or multi-channel systems (5+1 or 7+1 and larger) such as DOLBY, DTS, THX, etc.
Subwoofer: Type Active – Class D power amplifier Hypex: 400 W @ 4O Dimensions Height x Width x Depth 39 cm x 39 cm x 40 cm / 15.35" x 15.35" x 15.75" Free Field Frequency Response ±2.5 dB: 19-90 Hz SPL in Free Field @ 1m RMS: 108 dB (single subwoofer) Peak: 116 dB (pair of subwoofers) Weight 24 kg / 53 lbs Calibrated Controls: Input Sensitivity Switch / VOLUME (8 positions) -4.5dB, -3dB, -1.5dB, 0dB, 1.5dB, 3dB, 4.5dB, 6dB Input Sensitivity Switch / VOLUME (3 positions) -20dB, -10dB, 0dB Low-pass filter Switch CUT OFF 40Hz, 45Hz, 50Hz, 57Hz, 63Hz, 71Hz, 80Hz, 90Hz Filters By-Pass Switch UNFILTERED (LFE) Position down: filters ON Position up: filters OFF PHASE Switch 0 degrees, 180 degrees STAND-BY Switch Position down: active STAND-BY Position up: continuous mode (Stand-by OFF) Loudspeaker: Subbass Loudspeaker Ø 29 cm Diaphragm: cellulose, surround: rubber Amplifiers: Subbass Loudspeaker Power Amplifier 400 W RMS @ 4 O (270 W RMS @ 6 O) THD distortions Typ 0.01%, Max 0.05% 20Hz