Power Supplies for Guitar Effects

DC connection cable for Cioks multi-purpose power supplies, EIAJ plug to 5.5/2.1 mm DC barrel plug, 15 cm long, with positive inner conductor.

Stabilised adapter for 9V devices featuring operating mains voltage from 110-240V, reliably supplying 500mA direct current.

Daisy-chain cable with six outputs, compact angled barrel connectors, spiral shield.

Set of 2 female plugs for the XPND Battery Power Kit or the XPND Daisy Chain.

Set of 2 male plugs for the XPND Battery Power Kit or the XPND Daisy Chain.

Daisy-chain cable with eight outputs, compact angled barrel connectors, spiral shield.

Adapter cable for multi power supplies, doubles the current, negative inner conductor, two 2.1 mm hollow plugs to one 2.5 mm hollow plug

Voltage Doubler Cable, 18 or 24 Volt, 10 cm length, 2.1 mm connector, Center Positive.

Cable for the D'Addario XPND Pedal Power Battery Kit in 3 m length.

Powerful power supply unit for Ampero and other effect pedals. Total length of 1.2 m; 50 cm AC cable

Ansmann APS1500 Traveller power supply, energy saving in "stand by" operation 94% compared to conventional power supplies. 3-12V universal power supply for powering many small electrical devices vo...

AC power supply unit for effect devices with 9 V output voltage, 2100 mA, 2.5 x 5.5 mm barrel plug and 1.8 m cable.

Reliable 9 V/500 mA power supply unit with 1.9 m cable and international adapters for pedals and travel.

Powerful 9V power supply unit with 2500 mA, 3 m cable and international plug-in adapters for pedalboard power supply.

Power supply for effect units, 9 Volt DC, 2500 mA, 3 m cable, switching power supply, plug-in adapter

The Korg KA189 Power Supply is a power supply, for microKORG, Electribe A,R,S, microKONTROL, padKONTROL, SDD-3000 PEDAL, AX1500G, AX3000G/B, D3, VOX Dynamic Looper, VOX-JS, Cooltron, with 9V voltag...