Your Feedback

Synthrotek Case Power Green

Item: SYN0005767-000
Enable Social Media
Synthrotek Case Power is a (power supply) bus board for two 104TE rows. It is basically a Noise Filtering Distribution Board...  All product info

This product is no longer available!
We are happy to help you!
Our team
+49 (0)221 / 88 84 - 1610
+49 (0)221 / 88 84 - 2500

Activate social media for sharing. Data will only be sent via social networks with your consent.

Synthrotek Case Power

Bus Board for two 104TE rows

Synthrotek Case Power is a (power supply) bus board for two 104TE rows. It is basically a Noise Filtering Distribution Board with additional built-in voltage regulators. 18 Doepfer-Style Eurorack connectors with reverse polarity protected connectors, as well as a Molex quick-release lock. As a bonus feature, connection contacts for power supplies from other manufacturers (e.g. Doepfer PSU3) are installed on the Case Power Bus Board.

Power supply and daisy chain

To connect a power supply to the Case Power board you can use either the 3U Powerpanel or a low-cost No Panel Power DIY Kit. The Case Power Boards can be easily and safely connected in series with the Noise Filtering Distribution Boards for the power supply of larger modular systems.

  • advanced fully regulated low-noise voltage converters on each terminal row
  • Overvoltage protection: the module switches off automatically if too much current is drawn on a row of connections
  • the noise-reducing capacitors are placed in two sections on the board to reduce the noise transmitted from module to module to a minimum.
  • 18 Doepfer-Style Eurorack connectors with reverse polarity protected tub connectors
  • Molex quick connectors for easy and safe installation of the Noise Filtering Power Distribution Boards (not included)
  • Power connections for the use of power supplies of other manufacturers
  • Current output: (+12V/-12V) (3A/1.3A) (5V/1.5A)
  • LED status display for each connection row (+12V/-12V/+5V)
  • Protective cover with Synthrotek logo over the voltage converters
  • eight holes for mounting in case (spacers and screws included)
  • requires a 16-19V 90W power supply (not included)
  • The power supply is not connected directly to the case power board; the board must either be wired in the case, or the backlit 3U Power Panel must be used.
  • fits into an 84TE case, or larger cases
  • dimensions: 37,8 x 3,5cm
  • Height: 22mm (spacer added 3mm)

Synthrotek Case Power


  • Manufacturer: Synthrotek
The Largest Music Store in Europe

Music Store professional in Cologne


DV247 Music Store in London

DV 247 Store in London Romford

Video: Synthesizer

Video: Piano Center

Video: Keyboards