Activate social media for sharing. Data will only be sent via social networks with your consent.
Tell a friend
Write a review
Seen a better price?
MORE THAN 3.000 PRODUCT VIDEOS
EASY RETURN
3 YEARS WARRANTY
55.000 PRODUCTS READY TO SHIP
TECH 21 dUg Ultra Bass 1000 Head
Signature bass head with 1000 watts of power and two channels, including foot switch
The Tech 21 dUg Ultra Bass 1000 Head was developed together with Doug Pinnick, the bassist of the legendary prog rockers King's X, and accordingly turns out to be the ideal supplier for massively distorted bass sounds with rich pressure. Responsible for this is the innovative concept with two interactively usable bottom and top channels, which in effect correspond to Doug's preferred dual-amp setup with a bass amp for crisp low-end thrust and a guitar amp for juicy Distortion in the mids and treble. Here, the bottom channel offers an adjustable low-pass filter and compressor, while the 2-band EQ with semi-parametric mids allows for precise tuning of the sound. The top channel, on the other hand, which can only be used in conjunction with the bottom channel at Mix, features a high-pass filter that determines the distorted frequency ranges, a drive control for adjusting the gain intensity, and a 2-band EQ for mids and highs. Also available via the Tech 21 dUg Ultra Bass 1000's gain switch is a boost with 10 dB of signal boost, which elicits increased distortion from the top channel while the bottom channel goes into compression earlier. With up to 1000 watts of power amp output, the Tech 21 Doug Pinnick dUg Ultra Bass 1000 head furthermore delivers massive volume reserves for rehearsal room and stage.
The Tech 21 dUg Ultra Bass 1000 Doug Pinnick signature top features two channels and 1000 watts of power amp output.
The Tech 21 dUg Ultra Bass 1000 Head at a glance:
Bass top, made in the USA.
Doug Pinnick (King's X) signature model
1000 watts of power @ 4 ohms (600 watts @ 8 ohms, 300 watts @ 16 ohms)
Two channels (bottom/clean and top/drive)
Bottom channel can be used individually, top channel only in Mix with bottom
Bottom channel with low-pass filter, compressor, bass control and semi-parametric mids
Top channel with high-pass filter, drive control, EQ for mids and treble as well as level and master controls
Mix switch for simultaneous activation of both channels
Gain switch for +10 dB boost
Serial effects loop
Tuner out with mute function via footswitch
Two SansAmp XLR direct outs for top and bottom channel
SansAmp Mix XLR direct out for both channels in the mix
