Fame Jupiter Record. Set Mid Range - Kondensatormikrofon-Set
Fame Jupiter Record Set Mid Range - professional recording bundle for advanced users with microphone, interface and software.
Fame Jupiter Record Set Mid Range - The recording bundle for advanced users
The Fame Jupiter Record Set Mid Range is aimed specifically at ambitious musicians, producers and content creators who want to take the next step beyond classic entry-level solutions. This carefully curated advanced bundle combines high-quality Hardware with professional software and delivers a studio-grade signal chain for vocals, speech, instruments and voice-over at a high level.
Fame Pro Series Jupiter - Condenser microphone
Large-diaphragm condenser capsule for high detail resolution
Cardioid polar pattern for focused, directional recordings
Wide frequency response for a full, balanced spectrum
Sensitivity of -33 dB (±2 dB) for a powerful output level
output impedance of 200 ohms for clean and interference-free signal transmission
Maximum sound pressure level of 130 dB for flexible application possibilities
Signal-to-noise ratio of 72 dB for clear, undistorted recordings
Dynamic range of 105 dB for natural transients and dynamics
XLR connection as a reliable studio standard
Operation with 48 V phantom power
High-quality shock mount for effective impact sound decoupling
Screw-on microphone holder for a stable hold in any position
robust metal construction for long-lasting studio use
ideal for speech, vocals and acoustic instruments
warm, silky "cream tone" sound for pleasant vocal colors
1 × FAME Pro Series Jupiter
1 × microphone holder with spider
1 × instruction manual
Type: Large diaphragm condenser microphone
Capsule: ⌀ 34 mm large diaphragm
Polar pattern: cardioid (cardioid)
Frequency response: 20 Hz - 20 kHz
Sensitivity: -33 dB (±2 dB)
Output impedance: 200 Ω
Maximum sound pressure level (max. SPL): 130 dB
Signal-to-noise ratio (S/N ratio): 72 dB
Dynamic range: 105 dB
Connection: XLR (female, 3-pin)
Power supply: 48 V phantom power
Dimensions: ⌀ 52 × 195 mm
Weight: 462 g
Professional sound with character
At the center of the bundle is the Fame Pro Series Jupiter large-diaphragm condenser microphone. With its 34 mm capsule, high dynamic range and characteristic warm, silky "cream tone", it is ideal for vocals, speech and acoustic instruments. Fine transients, natural highs and a controlled bass range ensure a modern, high-quality sound aesthetic - ideal for demanding productions.
Analog coloration & dynamics at the touch of a button
The Universal Audio VOLT 276 audio interface clearly sets this bundle apart from the entry-level segment. The integrated vintage mic preamp emulation and the 76-style analog compressor enable musical saturation and controlled dynamics during recording - without additional plug-ins. Direct monitoring, high conversion quality and robust drivers make the interface the perfect control center for serious recording setups.
Monitor, record, produce - without compromise
The Fame DT-750 studio headphones deliver a clean, balanced stereo imagewith very good detail separation - ideal for recording and editing. The Set is complemented by a balanced Fame Ultra XLR cable, an effective double-layered pop guard and a solid studio microphone stand that can safely support even heavy studio equipment.
Large software package for immediate productions
In addition to the hardware, the bundle includes a comprehensive software package with professional tools, including DAW, virtual instruments, effects and high-quality emulations.
This means that the Set is not only ready for recording, but also for production - from the first take to the final mix.
Ideal for
Advanced singer-songwriters
Vocal and voice-over production
Home and project studios with high standards
Music and content production at studio level
Fame microphone cable "Ultra" 3 m - Microphone cable
Fame Audio microphone cable "Ultra" in 3 m length
High-quality Rean plugs and optimally protected bulk cable for excellent performance
Symmetrical signal routing and a cross-braided shield guarantee high interference immunity
0.22 mm² cross-section
Three-pole XLR connectors
Fame DT-750 - Closed-back headphones
closed studio headphones
high-resolution, very good frequency separation
clean stereo image
very pleasant sound, yet analytical
softly padded ear pads and headband, very comfortable to wear
good shielding from ambient noise
detachable cable with locking mechanism
all cables are fabric-covered
well made, stable and yet lightweight
measurement curve available in Sonarworks SoundID Reference
nominal power consumption: 400 mW
incl. screw adapter to 6.35 mm (gold-plated)
Universal Audio VOLT 276 - Audio Interface
USB 2.0 audio interface
2 In (combo jacks)/ 2 Outs (jack)
for Mac, PC, iPad* and iPhone*
ideal for instruments such as guitars, basses, vocals etc.
incl. 620 Tube Vintage Mic Preamp Emulation AND 76 analog Compressor
24-bit/192 kHz
High-quality headphone amplifier for loud, clean monitoring
48 V phantom power for condenser microphones
Direct monitoring for latency-free recording
Robust housing
1x1 MIDI I/O
incl. USB-C to USB-A cable
USB 2.0 (or higher) port
Intel, AMD or Apple Silicon processor
Windows 10, 64-bit edition
or macOS 10.13 Mojave or higher
Internet connection for software downloads
iPadOS / iOS 14 or higher
LUNA Digital Audio Workstation
PolyMAX Polyphonic Synth
Century Tube Channel Strip
Pultec Passive EQ Collection
Teletronix LA-2A Classic Leveler Collection
Galaxy Tape Echo
Pure Plate Reverb
Oxide Tape Recorder
Verve Analog Machines Essentials
Marshall Plexi Classic Amp Bundle from Softube
Ableton Live Lite
Melodyne Essential by Celemony
Ampeg® SVT-VR ClassicBass Bundle from Plugin Alliance
LX480 Essentials from Relab Development
Virtual Drummer DEEP from UJAM
Virtual Bassist DANDY from UJAM
LABS from Spitfire Audio
Fame PF 150D - Pop protection
Fame PF 160 (16cm Ø)
Fame PF 135L (13,5cm Ø)
Fame PF 130 (metal)
Fame PF PRO (metal)
Double-layered pop guard
Silk-covered
Unscrewable head
Diameter 15cm
Fame Studio Mic Stand - Microphone stand
solid support for every microphone
for Live and studio applications
extendable swivel arm
also ideal for heavier microphones
3-legged base design similar to PA speaker stands and cymbal stands
provides a much more secure stand than conventional microphone stands
Very good workmanship
Stable enough to securely attach reflective filters and prevent them from wobbling
