The tarm HD show laser projector fulfills highest requirements in terms of brightness, beam divergence and accuracy.
This tarm show laser system is equipped with Coherent Taipan OPSL and with the newly developed Coherent HD OPSL laser modules with TEM00 beam profile (TEM = Transverse electromagnetic mode) . At TEM00 the brightness of the beam spot is homogenously distriburted in a Gaussian curve, so the spot is perfectly round and has no deviances due to wave interferences. Besides that, the tarm HD has an extremely low beam divergence: with CT-6210H scanners and standard optics: ca. 0.5 mrad or optionally with CT-6215HP scanners and low divergence optics: ca. 0.3 mrad (TEM00). This results in an extremely increase of brightness in comparison to 'conventional' OPSL laser modules and especially in comparison to diode laser sources. The excellent beam specifications make this laser system ideal for graphics and long distance projections, but also for beam effects, which shall be visible from far away.
The laser projector is equipped with Coherent Taipan OPSL and HD OPSL (High Definition) laser modules: 2.5 W / 639 nm OPSL, 5 W / 530 nm HD OPSL, 2 W / 460 nm HD OPSL. The tarm HD standard comes with very fast CT-6210H scanners. The scan speed of 60kpps@8° ILDA and a maximum scan angle of 80° (@35kpps) make the system suitable for any kind of application. Optionally this laser system is also available with CT-6215HP scanners. The tarm HD has a rotating Gobo Wheel integrated. tarm HD projectors are equipped with an ILDA interface for standard computer control. Projector settings can easily be adjusted through the versatile remote touch control pad.