Interface Modules

Koma electronics, Detective 1U, Envelope Follower, Audio Extractor, Threshold, Gate & CV Out, Intellijel 1U format

Eurorack module, fivefold design, level conversion from Eurorack to line level, passive attenuator

Preamplifier, 2 channels, converts line level to Eurorack level, 45x gain, overload LEDs, normalizations for stereo applications

Monophonic MIDI-to-CV/gate interface with TRS-MIDI, parallel CV/gate outputs and Intellijel-1U format.

MIDI to CV/Gate interface, monophonic, note values only, MIDI In & Out via TRS adapter, MIDI breakout for A-155-2 & A-198-2

The module matches the control voltages of a Eurorack modular system to the Moog Mother-32 and vice versa.

Compact MIDI to CV/Gate interface designed specifically for Behringer System 100, 2500 Series and Moog System Eurorack modules.

The uDualHP from Flame is a 2-channel headphone amplifier with separate volume control for the two outputs.

Befaco 1U ST AMP, Stereo Preamplifier, Gain, Stereo Output, Compatible with Intellijel Cases Palette104 & 7U Performance

Intellijel Stereo Line In 1U 12HP Stereo Audio Input Eurorack Synthesizer Module with Line Level and LED Display

The 1U Stereo Out from Intellijel is a 1U mono/stereo preamplifier with line level (+4dBu), which is mainly used in Intellijel 7U cases. CV, Eurorack, Modular, Modular System

The 1U Bye Bye from EoWave is an input/output expander for the Supamix from the same company.

The Doepfer A-119v External Input / Envelope Follower is an interface module for modular synthesisers in the Eurorack format.

The Perfect Pitch PP1 from Behringer converts an audio signal to MIDI, USB and control voltages.

Simple USB-C audio interface as a stereo AD/DA converter between DAW and modular system for recording and output.

Befaco 1U OUT, line-out module, stereo input, cue input, pre-listen main/cue, headphone output, compatible with Intellijel Cases

The orphone/lineout from EoWave is an input/output expander for the Supamix from the same company.

The USB-2CH from After Later Audio is a stereo AD/DA converter in Eurorack format.

MEMS microphone module in Intellijel 1U format - captures audio signals for effects, samplers & triggers from the surrounding area.

2-TE output module with stereo line-out, headphone amplifier, mono-to-stereo conversion and separate level controls.

Compact Eurorack output module with stereo output, headphone connection and level control on only 2 HP.

The After Later Audio Light Rail connects two Eurorack modular systems via a network cable.

The MEMS Mic from Intellijel is a microphone module that is only 2HP narrow and has a good sound.