Your Feedback

Doepfer A-167 Analog Comparator

(2)
Item: SYN0003200-000
  • SOLD OUT!
Doepfer A-167 Analog Comparator Product Image
Enable Social Media
The Doepfer A-167 Eurorack Analogue Comparator is a Eurorack analogue comparator module, which compares analogue voltages...  All product info

This product is no longer available!
We are happy to help you!
Our team
Export
export@musicstore.com
+49 (0)221 / 88 84 - 1610
+49 (0)221 / 88 84 - 2500

Activate social media for sharing. Data will only be sent via social networks with your consent.

  • INTERACTIVE
    CATALOGUE
  • MORE THAN 3.000
    PRODUCT VIDEOS
  • EASY
    RETURN
  • 3 YEARS
    WARRANTY
  • 55.000 PRODUCTS
    READY TO SHIP

Product information DOEPFER A-167 ANALOG COMPARATOR

Comparator module

The Doepfer A-167 Eurorack Analogue Comparator is a Eurorack analogue comparator module, which compares analogue voltages and derives a Gate signal. The A-167 is a module that compares analogue voltages and derives a gate signal. The state of the gate output (low/high) depends upon which of the voltages is higher. It is possible to compare two external voltages (+In and -In) or an external voltage (+In or -In) with a manually adjustable value (Offs. control). Both analogue inputs +In and -In are equipped with an attenuator.

Internally the module generates the voltage k1*(+In) - k2*(-In) + Offset and und sets or resets the gate output depending on the result of this internal voltage (>0V or <0V). The factors k1 and k2 represent the manual attenuators. An LED shows the current state of the gate output. The Gap control is used to adjust a so-called "hysteresis". As long as this control is set to zero the switching levels for both on and off state of the gate signal are identical. As soon as the Gap control is turned up the switching levels for on and off state fall apart and a so-called hysteresis appears. Normal and inverted gate outputs are available. In addition the internal voltage k1*(+In) - k2*(-In) + Offset is available at the Analogue Sum socket. Consequently the module can be used as subtractor and offset generator too.

Applications: Generation of gate signals depending upon analogue voltages. E.g. a gate signal that depends upon the present value of a LFO (triangle), ADSR or random signal can be generated and used to control a voltage controlled switch that on the other hand switches different control voltages or audio signals. The module can even be used to add the free-running mode to each ADSR ,e.g. A-140 similar to a LFO but with separate controls for rising and falling edge and exponential waveforms - in contrast to the linear waveforms of a LFO.

The main features of the Doepfer A-167 Eurorack Analogue Comparator include:

  • A module that compares analogue voltages and derives a gate signal
  • Both analogue inputs +In and -In are equipped with an attenuator
  • Width: 8HP / 40.3mm
  • Depth: 40mm (measured from the rear side of the front panel)
  • Current: 20mA

Features:

  • Type of Modul: Misc. Tools
Doepfer A-167 Analog Comparator Product ImageDoepfer A-167 Analog Comparator
N/A

The Largest Music Store in Europe

Music Store professional in Cologne

MusicStore-MusicStoreShop:/department-footer/MusicStore_Aussen_Neu_schmaler.jpg

DV247 Music Store in London

DV 247 Store in London Romford

Video: Synthesizer

Video: Piano Center

Video: Keyboards