Shure MX150B/C-TQG

The Shure MX150B/C-TQG is a subminiature, professional electret condenser microphone ideal for speech reproduction and other applications requiring discrete flat-positioning. The MX150 has cardioid and omnidirectional polar patterns and offers uncompromising sound quality and high reliability with minimal visibility for use in television productions, corporate lectures, AV teleconferences, church facilities and sound reinforcement. CommShield technology provides excellent RF immunity to mobile phones and digital pocket transmitters.

Each microphone comes with a snap-in foam windscreen to minimise wind noise and a multi-position tie clip with integrated cable retention to minimise cable handling noise. The MX150 lavalier microphone is designed for applications where minimal visibility and uncompromising sound quality are required. With its subminiature dimensions, it is ideal for theatrical performances, television broadcasts, video, film and event productions. Despite its small size, the microphone's condenser capsule provides full, clear and natural speech reproduction.

• Professional subminiature lavalier microphone (only 5.8 mm diameter with 11 mm length)
• Permanently polarized condenser capsule
• Wide frequency range for natural voice reproduction
• Interchangeable equalization caps for height adjustment
• Robust, Kevlar reinforced cable
• With double tie clip and two foam windscreens
• Polar pattern: cardioid
• Frequency response: 20 to 20,000 Hz
• Sensitivity Open-circuit voltage, at 1 kHz, typical: -51.0 dBV/Pa[1] (3.0 mV)
• Maximum sound pressure level 1 kHz at 1 % total distortion factor: 147.5 dB
• Signal-to-noise ratio: 57.5 dB
• Dynamic range at 1 kHz: 111.0 dB
• Inherent noise: 36.5 dB
• Supply voltage: 5 V DC (0.04-0.18 mA)
• Connector: TQG For Shure transmitters with 4-pin TA4F/TQG jacks