Sus opiniones

Avantone BV-12 Micrófono a válvulas

Artículo: REC0010788-000
  • AGOTADO!
Avantone BV-12 Micrófono a válvulas Imagen del producto
Habilitar redes sociales
The Avantone BV-12 is a high quality multi-pattern tube microphone that looks as beautiful as it sounds.  Based on t...  Toda la información del producto

Este producto ya no está disponible!
¡Estamos encantados de ayudarle!
Nuestro equipo
Hablamos español
Export
export-es@musicstore.com
+49 (0)221 / 88 84 - 1640
+49 (0)221 / 88 84 - 2500

Active las redes sociales para compartir. Los datos solo se enviarán a las redes sociales con su consentimiento previo.

  • CATÁLOGO
    INTERACTIVO
  • MÁS DE 3000
    VÍDEOS DE PRODUCTOS
  • DEVOLUCIÓN
    SIN COMPLICACIONES
  • 3 AÑOS
    DE GARANTÍA
  • 55.000 PRODUCTOS
    LISTOS PARA SU ENVÍO

Descripción

The Avantone BV-12 is a high quality multi-pattern tube microphone that looks as beautiful as it sounds.  Based on the vintage mics of the 1950s and 60s, it both performs and looks like its influences.

The BV-12 features a choice of different polar patterns, including Omni, Cardioid and Figure-8 and a selection of 'in-between' combo patterns, a -10dB pad and 80Hz roll off for controlling hot signal and cleaning up the low end respectively.   All this, combined with a 20Hz-20kHz frequency range and a dual sided 34mm edge-terminated gold-sputtered Mylar capsule, give the BV-12 a warm and pleasing character.

The Avantone BV-12 comes with a retro shockmount, a PS-1 multi-pattern power supply, a Mogami GoldStudio Pro 15' 7-pin XLR for connecting the mic to the PSU and both a wooden box for the mic itself and wood-sided tweed travel case for the mic and all accessories.

The Avantone BV-12 main features include:

  • Type: Tube-Type True Condenser
  • Capsule: Dual-sided 34mm edge-terminated gold-sputtered Mylar (6 micron)
  • Polar Pattern/s: 9 Patterns selectable at PS-1 Power Supply
  • Frequency Response: 20-20,000Hz +/- 3dB
  • Output Impedance: <=250 Ohms / transformer isolated
  • Maximum SPL : 136dB (0.5% THD @ 1000Hz) 146dB with pad engaged
  • Equivalent noise level 17dB (A weighted EC651)
  • S/N Ratio re 1Pa : 78dB
  • Sensitivity -38dB
  • Output Connector: Male XLR 7 pin with special power supply and cables
  • High-Pass Switch 80 Hz 6dB/octave
  • Attenuation Switch -10dB
  • Included Accessories: Wood Box, Shockmount, 7-pin cable, Tweed Road Case, PS-1 Power Supply
  • Power Requirement: Dedicated PS-1 Power Supply, 115/230VAC selectable
  • Weight: .8kg / 1.8 lb.
  • Dimensions: 237mm x 46mm (9.5" x 1.8")
  • Finish: Polished Nickel trim / Buttercream Body

Características:

  • fabricante: Avantone
  • Aplicación: Estudio
  • Conexión: XLR de 3 polos
  • Tipo de conversión: Condensador
  • característica direccional: Multi-Pattern
  • Signal: Voces
  • respuesta en frecuencia desde (Hz): 20
  • respuesta en frecuencia hasta (Hz): 20000
  • incl. accesorios: Estuche
Avantone BV-12 Micrófono a válvulas Imagen del productoAvantone BV-12 Micrófono a válvulas
N/A

Información sobre departamento de Pro Audio

Music Store professional en Colonia

MusicStore-MusicStoreShop:/department-footer/MusicStore_Aussen_Neu_schmaler.jpg

High-End Demo

High-End Demo

Video: Pro Audio

Centro de grabación

MusicStore-MusicStoreShop:/department-footer/ProAudio-1.jpg

Galería de fotos - Pro Audio

MusicStore-MusicStoreShop:/department-footer/ProAudio-4.jpg