Heritage Audio HA73EQ ELITE

Товар: REC0013513-000

Лидер продаж!

Список товаров для сравнения
Рекомендовать

Information on the disposal of old devices

Микрофонный предусилитель с эквалайзером, созданный на основе легендарной модели 1073, добавляет яркую четкость и насыщенность ... Вся информация о товаре

Варианты товара

Heritage Audio HA73X2 ELITE Изображение товара

Heritage Audio HA73 ELITE

Производитель: Heritage
Amplifier principle: Transistor
Number of channels: 1
Формат: 19"
Max. Gain in db: 80,0
...

(1)

579,00 €

Подробности

Heritage Audio HA73X2 ELITE

Производитель: Heritage
Amplifier principle: Transistor
Number of channels: 2
Формат: 19"
Max. Gain in db: 80,0
...

1.021,00 €

Подробности

Мы всегда рады Вам помочь!

Export
export@musicstore.com
+49 (0)221 / 88 84 - 1610
+49 (0)221 / 88 84 - 2500

Онлайн
каталог
БОЛЕЕ 3000 ВИДЕО
ПРЕЗЕНТАЦИЙ ТОВАРОВ
УДОБНЫЙ ВОЗВРАТ
ТОВАРА
3 ГОДА
ГАРАНТИИ
55.000 ТОВАРОВ
ГОТОВЫ К ОТПРАВКЕ

Информация о продукте - Heritage Audio HA73EQ ELITE

Microphone preamplifier with EQ

Based on the legendary 1073, the Heritage Audio HA73EQ ELITE microphone preamplifier with EQ delivers vivid clarity and pressure to any microphone or instrument, and with up to 80 dB gain, the HA73 is suitable for any microphone type from condenser to dynamic to ribbon microphones. Carnhill's hand-wound input and output transformers give any source, whether microphone, line or DI instrument signal, warmth, richness and assertiveness. The separate gain controls for the inputs and outputs allow the signal to be selectively colored by the transformers without overloading the output stage. The DI circuit is located in front of the microphone input transformer: this preserves the specific character of a fed-in bass DI signal, and if the input is driven higher, the typically saturated sound that is known from classic mixing consoles is produced.

EQ Section

The EQ section of the HA73EQ ELITE is based on the classic 1073 circuitry and produces the same sound and typical harmonic distortion. The 3-band design consists of a fixed frequency RF shelving section, a fixed quality center band with six selectable frequencies and an LF shelving filter with four switchable frequencies. The high-pass filter with four selectable frequencies can be used to attenuate unwanted background noise in the bass range.

Features of Heritage Audio HA73EQ ELITE:

Microphone preamplifier with EQ based on the 1073
Manufactured to the same specifications as the acclaimed 73JR, 73EQJR and DMA73 models.
Hand-wound transformers from Carnhill, St. Ives, England.
Three-stage, fully discrete microphone preamp with 80 dB gain.
Line input via separate XLR jack to add heat and pressure to tracks already recorded.
20 dB PAD in the microphone input prevents the input transformer from being overloaded if necessary.
LO-Z switches the input impedance of the microphone transformer from 1,200 to 300 ohms.
Extremely high impedance, JFET-based DI input.
Fully discrete 3-band vintage EQ with classic induction coils.
Hi shelf filter at 12 kHz.
Center band switchable between six operating frequencies and OFF.
Lo shelf filter can be switched between four operating frequencies and OFF.
Coil-based high-pass filter switchable between four operating frequencies and OFF.
Rack format with 1 height unit
External universal power supply for worldwide use
Made in Spain

Technical data:

Channels: Single channel
High frequency: +/-16 dB shelving EQ, 12 kHz, Baxandall characteristic
Low frequency: +/-16 dB shelving EQ, 35 Hz, 60 Hz, 110 Hz, 220 Hz, Baxandall characteristic
Mid Frequency: +/-18 dB peak EQ, fixed filter quality, 0.36 kHz, 0.7 kHz, 1.6 kHz, 3.2 kHz, 4.8 kHz, 7.2 kHz, based on the principle of double induction
High-pass filter: edge steepness 18 dB/octave, 50 Hz, 80 Hz, 160 Hz, 300 Hz, according to the induction principle
Impedance microphone input: HI, min. 1,200 Ohm, LO, min. 300 Ohm, transformer balanced
Impedance line input: 10 kOhm, transformer balanced
DI input impedance: > 2 Megaohm, unbalanced
Output impedance: < 75 Ohm, transformer balanced
Output (max.): > +26 dBm into 600 Ohm
Frequency response: 20 Hz to 20 kHz
Pad: 20 dB
Gain (max.): > 80 dB (microphone), 50 dB (line)
Power supply: 100 - 240 VAC (external universal power supply)
Dimensions: 19", 1 U