M-Audio BX5 D2 Active Studio Monitors

(9)

Товар: REC0009297-000

M-Audio BX5 D2 Active Studio Monitors Изображение товара

Продано!

Список товаров для сравнения
Рекомендовать

The M-Audio BX5A D2 is a pair of near-field monitors that are compact enough for project studios, home recording or editing... Вся информация о товаре

Варианты товара

M-Audio BX8 D2 Active Studio Monitors

Производитель: M-Audio

(9)

N/A

прибл. N/A

Подробности

Этот товар больше недоступен!

Найти альтернативу или продукт-преемникa...

Мы всегда рады Вам помочь!

Export
export-ru@musicstore.com
+49 (0)221 / 88 84 - 1690
+49 (0)221 / 88 84 - 2500

Онлайн
каталог
БОЛЕЕ 3000 ВИДЕО
ПРЕЗЕНТАЦИЙ ТОВАРОВ
УДОБНЫЙ ВОЗВРАТ
ТОВАРА
3 ГОДА
ГАРАНТИИ
55.000 ТОВАРОВ
ГОТОВЫ К ОТПРАВКЕ

Описание

Studio monitors active / pair

The M-Audio BX5A D2 is a pair of near-field monitors that are compact enough for project studios, home recording or editing suites. But they also cut a fine figure as pure desktop speakers.

Sophisticated technology for relaxed hearing

Special Class A/B drivers deliver above-average dynamics and sound accuracy across the entire frequency spectrum, while the latest Kevlar cone woofers and silk domes with waveguide technology provide full, defined sound. BX5 D2 guarantees the highest possible accuracy and an exciting listening experience. The special bass reflex port on the rear of the unit provides an extended low-frequency range and allows easy installation directly in front of a wall. The BX8A D2 is equipped with LEDs to determine the ideal central position (the so-called sweet spot) between the two loudspeakers during monitoring. You are in the optimal listening position when the BX5 D2 LEDs are brightest.

The M-Audio BX5A D2 guarantees accuracy and complex sound across the entire frequency spectrum, enabling stress-free and productive work.

Properties of the M-Audio BX5A D2:

Frequency response: 53 Hz to 22 kHz
Crossover frequency: 3 kHz
Low-frequency amplifier power: 40 Watt
High frequency amplifier power: 30 Watt
Maximum signal-to-noise ratio (dynamic range): > 100 dB (typical, A-weighted)
Polarity: positive signal at "+" input causes bass driver cone to vibrate outwards
Input impedance: 20 kOhm balanced, 10 kOhm unbalanced
Input sensitivity: 85 mV input signal (pink noise) generates 90 dBA output level (sound pressure level at 1 m and maximum volume)
Power supply: factory-set for either 115 V~ and 50/60 Hz or 230 V~ and 50/60 Hz
Protection circuits: Protection against HF interference, output current limitation (limiter), overheating protection, switch-on delay, infrasound filter, externally accessible mains fuse
Loudspeaker: vinyl-coated MDF
Size: 19,5 cm x 17,6 cm x 25,2 cm
Weight: 5 kg/unit