Стоимость доставки
от 20 евро
55000 товаров
готовы к доставке
Гарантия возврата денег
Политика возврата товара в течение 30 дней
В Вашей корзине находятся следующие товары
Стоимость доставки
от 20 евро
55000 товаров
готовы к доставке
Гарантия возврата денег
Политика возврата товара в течение 30 дней
The Mission Engineering VM-1-RD Volume Pedal is a passive volume pedal, featuring 500 kOhm input impedance, and a red finish. The VM-1 Volume Pedal will not suck your tone. Point to point hand wired, the VM-1 also includes a tuner out and mute switch. The Mission VM-1 is a passive volume pedal designed primarily for use with guitar. The 500K impedance is ideal for use with most passive electric guitar pickups. The input and output are hand wired together via the potentiometer. The potentiometer is sealed requiring zero maintenance, and is rated at greater than one million operations. The pedal is completely passive, needing no battery or external power supply to operate.
A loss of high frequency, sometimes referred to as tone suck, on passive volume pedals is often caused by the signal being split between the main and a separate tuner output. The resistance and capacitance applied to the signal chain as a result of the additional cables and components, causes a low pass filter effect which results in a loss of high frequency. The VM-1 resolves this problem by isolating the tuner out via a mute switch. In normal mode, the tuner out is completely bypassed. The tuner out is activated via the mute switch. Mute mode is engaged by pressing down on the front of the pedal. This enables the tuner and isolates the primary output for completely silent tuning, and noise free guitar changes.
The main features of the Mission Engineering VM-1-RD Volume Pedal include:
Mission Engineering VM-1-RD Volume Pedal Red
Lehle Dual Expression
Mission Engineering EP1-KP-BK Expression Pedal (Kemper Profiler)
Boss EV-30 Expression Pedal
Mission Engineering EP1-KP-GN Expression Pedal (Kemper Profiler)
Fender EXP-1 Expression Pedal