The Intellijel Planar is a vector joystick / quad panner module. With just a few audio and CV sources and some inter dependencies (i.e. use the Joystick CV to simultaneously modify the signals being processed by the VCAs) you quickly get highly complex sounds that you can easily control and play with. This module features vector mixing so you can put up to four sources into inputs A, B, C and D and then use the joystick to create the vector mix. Positioning the joystick in any corner will isolate that particular source. Putting the joystick in the center will create an even blend of all four sources. The resulting mix is taken from the MIX output.
With quad panning you can plug one source into input A and steer it to outputs A, B, C, D. You can also do stereo panning by just using a pair of outputs. The sense gate output is a slew detector which means the gate is only active when you are moving the joystick. Excellent for driving envelopes/VCAs to coordinate so that the output mix is only heard/used when the joystick is being moved. This module further features a manual gate output, CV inputs and CV outputs. This input is also very useful when coordinated with a CV recorder.
You can record the modulation from the X, Y outputs and then turn the joystick off (see switch at top left) and playback the modulation into the X and Y input. This will allow you to recreate a complex quad panning or vector mixing jam. The module will ship with a second faceplate that is designed to mounted upside down (so joystick is at the bottom) and there are jumpers on the back of the module so you can coordinate the reversed orientation of the joystick. This is to facilitate use in a skiff.
The main features of the Intellijel Planar include: