Your Feedback

Rupert Neve Designs Portico 5015 Mic Pre / Compressor

Item: REC0006202-000
  • SOLD OUT!
Rupert Neve Designs Portico 5015 Mic Pre / Compressor Product Image
Enable Social Media
Rupert Neve Designs Portico 5015 H Channel Strip comes with a faceplate that enables horizontal installation. With indep...  All product info

This product is no longer available!
We are happy to help you!
Our team
We speak English
Export
export@musicstore.com
+49 (0)221 / 88 84 - 1610
+49 (0)221 / 88 84 - 2500

Activate social media for sharing. Data will only be sent via social networks with your consent.

  • INTERACTIVE
    CATALOGUE
  • MORE THAN 3.000
    PRODUCT VIDEOS
  • EASY
    RETURN
  • 3 YEARS
    WARRANTY
  • 55.000 PRODUCTS
    READY TO SHIP

Product information - Rupert Neve Portico 5015 - microphone Preamp / Compressor

Rupert Neve Designs Portico 5015 H Channel Strip comes with a faceplate that enables horizontal installation.

With independent transformer-coupled mic preamp and compressor-limiter sections, the fully analogue Rupert Neve Designs Portico 5015 combines the outstanding sound quality expected from a Rupert Neve design with the total flexibility required by modern recording studios.

As an additional routing option, the mic pre output may be routed directly to the compressor section.

The microphone input is balanced but not floating, being a variant of an instrumentation amplifer using a Transformer-Like-Amplifier (T.L.A.) configuration with a toroidal Common Mode Rejection Low Pass Filter that excludes frequencies above 150 kHz.

In addition to the 72 dB of gain, the Portico 5015 mic pre includes individually selectable phase, mute, phantom power, a swept high pass filter from 20-250 Hz, and the Silk circuit which yields the rich warmth and presence of the renowned classic designs.

The compressor section has fully variable threshold, ratio, attack, release and makeup gain with two selectable VCA modes that provide for exceptional control of any source material.

Rupert Neve Designs Portico 5015 H features include:

  • Horizontal Faceplate
  • Level Meter: -30 dBu to +22 dBu With reference to the output
  • Mute: Cuts of the output signal post metering
  • High Pass Filter: Signals between 20 and 250 Hz can be attenuated, leaving the range above this unaffected
  • Provides 48V phantom power to microphones
  • Phase Inverts: flips the phase of an incoming source 180 degrees
  • Compression RATIO: Range from 1:1 to LIMIT (i.e. 40:1)
  • Ratio: Range from 1:1 to LIMIT (i.e. 40:1)
  • Threshold: Range from -30dBu to +20dBU
  • ATTACK TIME: Range from 20 mS to 75 mS
  • RELEASE / RECOVERY TIME: Range of RELEASE time is 100 mS to 2.5 Seconds