Ready to ship
55.000 Products
55.000 products
ready for shipment
Money Back
30 Day Return Policy
You have placed the following items into your shopping cart
Ready to ship
55.000 Products
55.000 products
ready for shipment
Money Back
30 Day Return Policy
Very linear frequency response characteristics, extreme high power handling while generating the lowest harmonic distortion of any comparable 18-inch transducer within its application range. The LF15X401 uses a fibre loaded cone assembly along with a high excursion triple roll surround. This combination provides remarkable strength and a peak to peak maximum excursion of 50 mm. The new dual forced hyper-venting system guarantee a very efficient voice coil ventilation for minimum power compression and incredible power handling.
Features 4-inch, fiberglass inside/outside copper voice coil 3000W continuous program power handling 96.5 dB Sensitivity 30 Hz - 1.5 kHz Frequency range Dual Forced Hyperventing System Dual spider design with silicon based dampening control Triple-roll surround and corrugated straight cone geometry
General Specifications Nominal Diameter: 380 / 15 mm/inch Rated Impedance: 8 Ohm Program Power: 3000 W AES Power handling capacity: 1500 W AES Sensitivity: 96.5 dB Frequency Range: 30 Hz ÷ 1500 Hz Effective Piston Diameter: 340/13.4 mm/inch Max Excursion Before Damage (peak to peak): 50 / 1.97 mm/inch Minimum Impedance: 6.3 Ohm Voice Coil Diameter: 100 / 4 mm/inch Voice Coil Material: Copper Voice Coil Winding Depth: 30 / 1.18 mm/inch Number of layers: 2 Kind of layer: inside / outside Top Plate Thickness: 15 / 0.6 mm/inch Cone Material: No pressed pulp Cone Design: Straight Surround Material: Polycotton Surround Design: Triple roll
Thiele/Small Parameters Resonance frequency: 34 Hz DC resistance: 5.5 Ohm Mechanical factor: 7.6 Electrical factor: 0.30 Total factor: 0.29 BL Factor: 26.5 T · m Effective Moving Mass: 170 g Equivalent Cas air load: 146 liters Effettive piston area: 0.091 m² Max. linear excursion (mathematical): 11.5 mm Voice - coil inductance @ 1kHz: 2,5 mH Half-space efficiency: 1.90%
Mounting information Overall Diameter: 393 / 15.5 mm/inch Bolt Circle Diameter: 371-376 / 14.6-14.8 mm/inch Bolt Hole Diameter: 6.5 / 0.3 mm/inch Front Mount Baffle Cut-out: 354 / 13.9 mm/inch Rear Mount Baffle Cut-out: 354 / 13.9 mm/inch Depth: 145 / 5.7 mm/inch Volume occupied by the driver: 4.3 / 0.15 liters/ft³ Net Weight: 12.6 / 27.7 kg/lbs
RCF LF15X401, Woofer 15", 1500 Watt RMS / 8 Ohm
RCF MB15X351, Mid-Bass 15", 700 Watt RMS / 8 Ohm
RCF L15P540, Woofer 15", 500 Watt RMS @ 8 Ohm