Stereo and multitrack recording to microSD, USB storage device or computer
4 headphone outputs, 2 balanced line outputs (6.35 mm each)
Wi-Fi and Ethernet connection possible
Application example | The RodeCaster Pro II in action
User-friendly all-in-one console
The RODECaster Pro II is a multifunctional console for producing and streaming podcasts, interviews or radio programs. It can also be used as an audio interface for recording music and vocals. Rode has placed particular emphasis on user-friendliness here: Two external devices can be supplied with signal simultaneously via USB, Bluetooth devices can also be used as players, SMART pads can be assigned various functions and 4 headphones can be operated simultaneously.
What can I connect?
The RODECaster offers a wide range of connection options. A total of 4 microphones or instruments can be connected to the high-quality preamps with up to +76 dB gain. Both USB ports, Bluetooth or saved sound files that are played via the SMART pads can be used as additional players. The integrated Wi-Fi and Ethernet connection is very practical for streams, allowing the RODECaster to be connected directly to the Internet. Up to 4 separate headphones can also be supplied with signal, so that streams and productions with up to 4 participants are possible. In addition, a pair of stereo speakers can be connected via a jack for use at Studio.
What sound options do I have?
Pre-programmed sound presets and a range of editing tools allow you to intuitively set up a professional radio sound. You can also work with effects and modulations such as reverb, delay, pitchshift or robot voice to enhance the sound of your recordings and podcasts. These can also be placed on corresponding SMART pads for quick availability.
Additional technical data:
Inputs: 4x Neutrik Combo (Mic/Line/Instrument)
Impedance microphone inputs: 4 kOhm
Line/instrument inputs: 6.35 mm TS (line/instrument switchable)
Impedance instrument inputs: 1 MOhm
Equivalent input noise: -131.5 dBA
Dynamic range: 113 dB
Frequency response: 20 Hz - 20 kHz
Maximum output level: +4 dBu
Headphone outputs: 4x 6.35 mm TRS (stereo)
Headphone amplifier: 250 mW @ 32 Ohm
Line outputs: 6.35 mm TRS (L/R), balanced
Bluetooth: Receiver + transmitter, wideband Bluetooth for first-class voice quality,
USB audio interface 1: 2 In/16 Out (multitrack) or 2 In/2 Out with mix-minus switching
USB audio interface 2: 2 In/2 Out with mix-minus switching
Digital conversion (maximum): 24 bit / 48 kHz
Recording: to microSDHC or microSDXC card (not included)
Data transfer: USB 3.0 SD card reader with 130 MB/s
USB recording: via USB-C on Mac, PC respectively iOS or Android device
USB recording (external storage medium): via USB-C (exFAT, at least 100 MB/s)
Power supply: 30 W USB-C PD (15 V, 2 A), power supply unit included in the scope of delivery
Dimensions: 30.5 x 27 x 6 cm
Scope of delivery:
1x RODECaster Pro II White
1x Power supply unit
1x USB-C to USB-C cable (3 m)
System requirements:
Windows 10 version 1803 or higher
macOS X 10.15 or higher
Android 9.0 or higher (device must support digital audio via USB-C)
iOS 13 or higher (optional SC15 connection cable required)
Manufacturer information
Røde Microphones Carnarvon St 107 2128 Silverwater Australia service@rode.com EU economic operator Hyperactive Audiotechnik GmbH Neukirchner Straße 18 65510 Hünstetten Deutschland info@hyperactive.de www.hyperactive.de
Presonus StudioLive 16.0.2. USB
Rode RodeCaster Pro II
Rode RodeCaster Duo