The MB8G200 is a professioanl mid-bass woofer featuring very high output and dynamics. The equipment, used a 22 coil, fiberglass former and copper inside / outside winding, has enable a very good transient peak response and has allowed good extension on mid-high frequencies. A specially designed M-roll surround guarantee a very low midrange distortion and perfect damping of the spurius resonances. Inverted dust cap for minimum cone break-up
Features 2-inch, fiberglass former, copper voice coil 400W continuous program power handling 94 dB Sensitivity 60 Hz - 4 kHz Frequency range M-roll damped surround
General Specifications Nominal Diameter: 200 / 8 mm/inch Rated Impedance: 8 Ohm Program Power: 400 W AES Power handling capacity: 200 W AES Sensitivity: 94 dB Frequency Range: 60 Hz ÷ 4000 Hz Effective Piston Diameter: 165 / 6.5 mm/inch Max Excursion Before Damage (peak to peak): 30 / 1.2 mm/inch Minimum Impedance: 6.2 Ohm Voice Coil Diameter: 51 / 2 mm/inch Voice Coil Material: Copper Voice Coil Winding Depth: 16 / 0.6 mm/inch Number of layers: 2 Kind of layer: outside Top Plate Thickness: 8 / 0.3 mm/inch Cone Material: No pressed pulp Cone Design: Curved Surround Material: Polycotton Surround Design: M - roll
Thiele/Small Parameters Resonance frequency: 76 Hz DC resistance: 4.8 Ohm Mechanical factor: 3.7 Electrical factor: 0.37 Total factor: 0.33 BL Factor: 12.5 T · m Effective Moving Mass: 25 g Equivalent Cas air load: 11 liters Effettive piston area: 0.021 m² Max. linear excursion (mathematical): 6.0 mm Voice - coil inductance @ 1kHz: 1.4 mH Half-space efficiency: 1.26%
Mounting information Overall Diameter: 239 / 9.4 mm/inch Bolt Circle Diameter: 221 / 8.7 mm/inch Bolt Hole Diameter: 6.5 / 0.3 mm/inch Front Mount Baffle Cut-out: 184 / 7.24 mm/inch Rear Mount Baffle Cut-out: 184 / 7.24 mm/inch Depth: 95 / 3.7 mm/inch Volume occupied by the driver: 0.8 / 0.03 liters/ft³ Net Weight: 3.1 / 6.8 kg/lbs