Your Feedback

sE electronics BL8

(1)

Item: REC0016544-000

Compare list
Recommend

Boundary microphone with semi-cardioid pickup pattern for recording kick drums or other sources with high sound pressure levels. All product info

Product variations

sE electronics BL8 Omni

Manufacturer: sE Electronics
Colour: Black
Microphone type: True condenser
Polar Pattern: Omnidirectional
Frequency range: 20 - 20000Hz
...

€ 251.30

ca. TL 2,556.37

Details

Standard Shipping (7-12 business days)

We are happy to help you!

Export
export@musicstore.com
+49 (0)221 / 88 84 - 1610
+49 (0)221 / 88 84 - 2500

INTERACTIVE
CATALOGUE
MORE THAN 3.000
PRODUCT VIDEOS
EASY
RETURN
3 YEARS
WARRANTY
55.000 PRODUCTS
READY TO SHIP

Product information - SE Electronics BL8

Boundary microphone with SE8 condenser capsule

Typical flat boundary microphone shape
Pristine sound due to low-noise electronics
Optimal sound quality due to gold-coated 3μm thin diaphragm
Perfectly suited for recording kick drums
Cardioid characteristic
Low-cut filter
Exchangeable capsule
Fully rubberized back
Robust construction
Mounting on surfaces possible
Compatible with sE Electronics sE8 ball capsule and the Kelly Shu Flatz Isolation System

Technical data:

Limiting sound pressure level: 143 / 153 / 163 dBSPL (0/10/20 dB attenuation filter).
Equivalent noise level: 14 dB(A)
Dynamic range: 129 / 139 / 149 dB (0/10/20 dB attenuation filter)
Signal-to-noise ratio: 80 dB
Impact sound filter: 80 / 160 Hz, 6 dB/oct, switchable
Attenuator: 10 / 20 dB, switchable
Power supply: 48 volts according to IEC 61938
Electrical impedance: 60 Ohm
Recommended load impedance: >1k Ohm
Current consumption: 5.0 mA

Versatile and rugged boundary microphone.

The SE Electronics BL8 is a boundary microphone with the same small diaphragm capsule that is built into the popular sE8 condenser microphone. Thanks to its acoustic design, the BL8 also allows you to record very low frequencies with high precision, making it ideal for recording kick drums. The transformerless Class A circuitry gives the Mikforon plenty of headroom without distortion. The cardioid polar pattern of the BL8 can be distinguished between three switchable stages. Thus, there is a switch on the rear panel that can be used to select the characteristic between "classic", "neutral-flat" and "modern". Modern" lowers the mids and 15dB and "classic" and 10dB. The switches for low-cut and att pad are also located on the back of the microphone and are used to counteract overload of the mixing console, microphone amplifier or audio interfaces. Low-frequency signal components can be removed at either 80 or 160 Hz via the Low Cut switch. An attenuation can be set via Att Pad, which reduces the signal of the microphone and 10 or 20dB. The BL8 is constructed of sturdy metal, making it suitable for stage use. In addition, it can be mounted with two screws, which are not included, on flat surfaces such as walls, but also on the grand piano.