Audio-Technica AT4047MP Multi-Pattern Condenser Microphone

(1)

Товар: REC0007364-000

Audio-Technica AT4047MP Multi-Pattern Condenser Microphone Изображение товара

Список товаров для сравнения
Рекомендовать

Information on the disposal of old devices

The Audio-Technica AT4047MPis a large-diaphragm side-address externally polarized (DC bias) condenser microphone. The Audio-Tec... Вся информация о товаре

Мы всегда рады Вам помочь!

Export
export-ru@musicstore.com
+49 (0)221 / 88 84 - 1690
+49 (0)221 / 88 84 - 2500

Онлайн
каталог
БОЛЕЕ 3000 ВИДЕО
ПРЕЗЕНТАЦИЙ ТОВАРОВ
УДОБНЫЙ ВОЗВРАТ
ТОВАРА
3 ГОДА
ГАРАНТИИ
55.000 ТОВАРОВ
ГОТОВЫ К ОТПРАВКЕ

Информация о продукте - Audio Technica 4047 MP Condenser Studio Microphone

The Audio-Technica AT4047MPis a large-diaphragm side-address externally polarized (DC bias) condenser microphone.

The AT4047MP is a large-diaphragm side-address externally polarized (DC bias) condenser microphone with three switchable polar patterns: omnidirectional, cardioid, and figure-of-eight. It is designed to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement.

The omnidirectional polar pattern is sensitive to sound coming from all directions. Select the omni pattern to pick up several voices or instruments on the same microphone, to diminish proximity effect, and to preserve the location’s ambient sound.

The cardioid polar pattern is more sensitive to sound originating directly in front of the element, making it useful in controlling feedback, reducing pickup of unwanted sounds and providing isolation between performers. The figure-of-eight polar pattern is more sensitive to sound originating in the front and back of the microphone, rejecting sounds from the sides. It is often used in conjunction with advanced stereo miking techniques.

The output of the microphone is a 3-pin XLRM-type connector. The microphone is equipped with a switchable 10 dB pad and a switch that permits choice of flat response or low-frequency roll-off (via integral 80 Hz high-pass filter).

The microphone requires 48V phantom power for operation.

The microphone is enclosed in a rugged housing. The included AT8449/SV shock mount provides superior isolation and permits mounting on any microphone stand with 5/8"-27 threads. A dust cover and a protective carrying case are also included.

The main features of the Audio Technica AT4047MP include:

Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
Three switchable polar patterns: omnidirectional, cardioid, figure-of-eight
Transformer-coupled output and specially tuned element provide sonic characteristics reminiscent of early F.E.T. studio microphone designs
Exceptionally low self-noise, wide dynamic range and high SPL capability
Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
Vintage silver-matte finish on microphone and shock mount
Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
Custom shock mount provides superior isolation
Integral 80 Hz high-pass filter switch and 10 dB pad switch
State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards
Element: Externally-polarized (DC bias) condenser
Polar patterns: Cardioid, Omnidirectional, Figure-of-eight
Frequency response: 20-18,000 Hz
Low frequency roll-off: 80 Hz, 12 dB/octave
Open circuit sensitivity: –42 dB (7.9 mV), re 1V at 1 Pa
Impodance: 100 ohms
Maximum input sound level: 155 dB SPL, 1 kHz at 1% T.H.D.; 165 dB SPL, with 10 dB pad (nominal)
Noise: 14 dB SPL
Dynamic range (typical): 141 dB, 1 kHz at Max SPL
Signal-to-noise ratio: 80 dB, 1 kHz at 1 Pa
Phantom power requirements: 48V DC, 3.4 mA typical
Switches: Polar selection; Flat, roll-off; 10 dB pad (nominal)
Weight: 524 g (18.5 oz)
Dimensions: 188.0 mm (7.40") long, 53.4 mm (2.10") maximum body diameter
Output connector: Integral 3-pin XLRM-type
Audio-Technica case style: R1
Accessories furnished: AT8449/SV shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case