Eurolite LED WF-30 Water Effect

When in operation, this LED projection effect is almost silent, allowing you to lose yourself completely in the atmospheric lights of the seas. The device can be controlled in both standalone and DMX modes. In addition, the WF-30 features a built-in microphone, allowing the impressive play of colours on the walls to synchronise with the beat of the music – making the LED unit ideal for parties too.

You can dim the light, adjust the colours exactly to your liking, or let the internal programmes determine the colour selection. Add an exciting strobe effect and let chance decide the speed, or simply control everything yourself.

Of course, the WF-30 comes ready to connect and with a mounting bracket – all you need to do is unpack it and switch it on! You decide whether you want to relax with the WF-30 or would rather pick up the pace a little!

The included IR-7 remote control further simplifies operation.

The LED WF-30 is also compatible with QuickDMX, Eurolite’s wireless DMX system. A phantom-powered USB socket for wireless transmission of the DMX signal via a QuickDMX receiver is located on the rear of the unit.

Features

• Built-in effect discs provide a beautiful water effect with RGB colour mixing
• Fitted with a powerful 40 W RGB LED (COB)
• Manual focus
• Auto, Music, Master/Slave and DMX modes
• Integrated show programmes in Auto and Music modes
• Direct colour selection for 18 colours
• Functions: static colours, continuous RGB colour mixing, internal programmes, dimmer, strobe effect with variable speed
• DMX512 control possible via any standard DMX controller
• Choice of 6 or 9 DMX channels
• Compatible with QuickDMX – the wireless DMX system from Eurolite
• Phantom-powered USB socket for QuickDMX receiver (accessory)
• Addressing and settings via control unit with 4-digit LED display
• Convenient remote control via the supplied EUROLITE IR-7 IR remote control
• Ready to connect via the included mains lead with earthed plug
• Colour generation: RGB
• Control: DMX; IR remote control; QuickDMX via USB possible
• Projection: flicker-free

Technical Specifications

• Power supply: 100–240 V AC, 50/60 Hz
• Total power consumption: 40 W
• Flash rate: 1–20 Hz
• Colour generation: RGB
• DMX channels: 6; 9
• DMX input: 1 x 3-pin XLR (M), recessed version
• DMX output: 1 x 3-pin XLR (F) recessed version
• Fuse: T-type, slow-blow, 1 A (replaceable)
• Power connection: IEC power supply (M) for built-in installation; power cable with earth contact (supplied)
• Fan: Yes
• Control: DMX, IR remote control, QuickDMX via USB possible
• Beam angle: 30°
• Housing colour: Black
• Length: 24.0 mm
• Width: 27.0 cm
• Height: 20.5 cm
• Weight: 2.90 kg