Intellijel Triatt

The Intellijel Triatt is a triple attenuator, inverter, attenuverter and DC voltage source module. This is a utility module we found ourselves always needing and using. The three well spaced knobs can act as active attenuators, attenuverters (bipolar) and inverting attenuators depending on the setting of the three-position switches. Each input is normalled to a DC voltage selectable via jumpers for each channel to be 5V or 10V. With nothing plugged into the jacks, each knob controls a voltage amount. So if the rear jumper for channel a was set to 5V then the knob a would control the following ranges on output a: position 1: 0 to – 5V, position 2: -5 to +5V, and position 3: 0 to +5V

The main features of the Intellijel Triatt include:

• Skiff friendly (single PCB)
• 3 modes for each channel
• 5/10V normalling to inputs
• With external signals it acts as active/buffered attenuator/attenuverter/inverter 
• Width: 6HP
• Power: 14mA @ -12V; 16mA @+12V