Power Adapters for Synth Modules

10 pin - 16 pin Eurorack power cable for modular synthesizers, link between backplane and Eurorack module

The 28cm long barrel cable (Right Angle) of 4ms was designed to connect two Row Power modules mounted on top of each other and to supply both units with power from the same source. CV, gate, power,...

Practical adapter for extending Flying Bus cables and busboards in the Eurorack system.

Three-pole connection cable for backplanes

Four-pole connection cable for backplanes

Practical helper and to relieve the power supply unit when switching on.

Synthrotek, Power and!, Mini Power Distribution Board, Daisychain, Molex, Power, Power Supply, Power

Module for power supply of a Eurorack modular system, +12 V: 1000 mA, -12V: 1000 mA, 5V: 500 mA, 4 TE width / 35 mm depth

Meanwell GSM90A15-P1M is a stabilized 15Volt laboratory table power supply which outputs a current of 90Watt. This power supply unit is suitable for the power supply of larger modular systems.

Eurorack power supply for up to 12 modules for installation in a self-built housing or frame.

The power module from Endorphin.es is a module for the power supply of smaller modular systems such as skiff cases up to 104 TE width. Power, Power, Power Supply, PSU, Multiple, CV, Eurorack, Modul...

power supply, Eurorack module, power, current, PSU, multiple, CV, Eurorack, modular, modular system

Synthrotek, Power and!, Mini Power Distribution Board, Daisychain, Molex, Power, Power Supply, Power

The Trolley Bus from Befaco is a power module with busboard for the Eurorack Modular System.