Swisson XSR-5R-5R RDM-DMX-Splitter

The splitters of the X-SR series from SWISSON are interference-resistant DMX and RDM splitters and boosters and reliably process DMX and RDM signals in professional use. Thanks to the specially designed power supply unit, they can also be used under difficult mains conditions. All ports are individually optically isolated and very well protected against transient overvoltages. In "DMX only" mode the X-SR splitters filter out all non-DMX data and generate a pure DMX signal without RDM or other protocols. The X-SR splitters from SWISSON are"discoverable", i.e. they are visible on the RDM controller. This simplifies the localization of errors.

• Reduction of assembly and cable costs
• Cabling becomes clearer and simpler
• Extend DMX lines to any desired distance
• Safe use of DMX by removing interference and processing the signal
• The optical separation of the inputs and outputs prevents the transmission / transmission of electrical interference
• Faults are quickly localized thanks to the built-in intelligent DMX protocol monitoring
• DMX line can be terminated at the push of a button, i.e. termination
• Robust power supply 50 VAC - 276 VAC

Execution:

• Type: DMX splitter for rack mounting
• Material: sheet steel
• Colour: red/black
• Signal distribution: 2x DMX in to 10x DMX out

Connections:

• Inputs: 2x XLR 5pin male DMX and RDM
• Outputs LINK: 2x XLR 5pin female DMX and RDM
• Outputs BOOST: 10x XLR 5pin female DMX and RDM

Control:

• Protocol: ANSI E1.11 (DMX-512), ANSI E1.20 (RDM)
• switchable: Terminal resistance

Technical data:

• Voltage: 50-276 V, 50/60 Hz
• Power supply: internal
• Safety standards: EN60950-1 / Ul508
• EMC emission: EN55103-1
• EMC immunity: EN55103-2

Dimensions/weight:

• Dimensions: 482 x 112 x 45 mm
• weight: 1,50 kg