Power Supplies for Guitar Effects

DC connection cable for Cioks multi-power supplies, EIAJ plug to EIAJ plug, 15 cm long, with positive inner conductor.

Set of 2 female plugs for the XPND Battery Power Kit or the XPND Daisy Chain.

Daisy-chain cable with six outputs, compact angled barrel connectors, spiral shield.

Stabilised adapter for 9V devices featuring operating mains voltage from 110-240V, reliably supplying 500mA direct current.

Set of 2 male plugs for the XPND Battery Power Kit or the XPND Daisy Chain.

Daisy-chain cable with eight outputs, compact angled barrel connectors, spiral shield.

Cable for the D'Addario XPND Pedal Power Battery Kit in 3 m length.

Adapter cable for multi power supplies, doubles the current, negative inner conductor, two 2.1 mm hollow plugs to one 2.5 mm hollow plug

Voltage Doubler Cable, 18 or 24 Volt, 10 cm length, 2.1 mm connector, Center Positive.

Powerful power supply unit for Ampero and other effect pedals. Total length of 1.2 m; 50 cm AC cable

AC power supply unit for effect devices with 9 V output voltage, 2100 mA, 2.5 x 5.5 mm barrel plug and 1.8 m cable.

9V DC power supply, 1.7 amps, 100-240 volts AC, transformerless design, hollow plug, jack plug, battery clip, all country formats.

Ansmann APS1500 Traveller power supply, energy saving in "stand by" operation 94% compared to conventional power supplies. 3-12V universal power supply for powering many small electrical devices vo...

Power supply for 18V DC effects units with an 18V DC output voltage, an EU mains plug and a hollow plug with a negative inner conductor.

Reliable 9 V/500 mA power supply unit with 1.9 m cable and international adapters for pedals and travel.