Envío gratuito
para pedidos superiores a 99€
55.000 productos
listos para ser enviados
Devolución del dinero
Política de devolución de 30 días
Ha colocado los siguientes artículos en su cesta
Envío gratuito
para pedidos superiores a 99€
55.000 productos
listos para ser enviados
Devolución del dinero
Política de devolución de 30 días
The Laserworld CS-2000RGB FX is a Show-Laser for semi-professional applications and is ideal for bars, medium-sized clubs and discos, but also for rental companies, mobile DJs, for private use and for party locations of all kinds. 3x Grating Effects have been added to the successor of the CS-2000RGB: Line Grating, Burst Grating and Radial Grating.
Together with the 200x patterns (approx.) stored on the Laser, this offers a multitude of combinations to make small to medium-sized locations shine brightly and impressively with laser light. The grating effects make the projected patterns appear as if they were not only represented by one laser but by many projectors. The resulting three-dimensionality allows for effects that could not be achieved in any other way.
The new CS-2000RGB FX is an RGB Laser System with a total power of up to 2000mW and a minimum power of 1600mW. The red laser source with a wavelength of 635nm has a minimum power of 250mW, the green DPSS at 532nm 250mW and the royal blue laser source has a wavelength of 445nm and a minimum output power of 1100mW. The laser sources enable powerful laser beams. With a beam diameter of approx. 3mm and a beam divergence of 2.0mrad, the laser projector has good beam characteristics and the galvo scanner system enables a scanning speed of up to 30kpps.
The microphone sensitivity and projection size can be adjusted using 2x rotary knobs on the rear of the unit. DMX, in automatic as well as in music mode, allows you to project about 200 integrated patterns, such as waves, tunnels, circles, etc. in different colours and speeds. In Automatic mode, the patterns are played back without any further action, while in music mode; patterns are played back in interaction with the music. In addition to the modes already listed, this laser projector also has a Master/Slave mode. Show-Lasers of the same series (slave projectors), which are connected via DMX cable to a main projector (master projector), output the same patterns in this mode as the Master projector.
The Laserworld CS-2000RGB FX can also be controlled via a PC using the integrated professional ILDA interface. Using laser software (e.g. show editor or show controller) your own or already existing laser shows, logos, texts, but also own graphics and animations can be output.
The system offers safety functions such as the key switch, an interlock interface and an on/off switch.
The Laserworld CS-2000RGB FX has a compact housing, which is reflected in the low weight. A sturdy mounting bracket allows various mounting and positioning options: the projector can be used either suspended or standing on the bracket, making it ideal for mobile DJs and temporary laser shows. Fixed installations such as on a truss, on ceilings or walls are also possible without any problems.
The main features of the Laserworld CS-2000RGB FX include:
Laserworld CS-2000RGB FX
