Готов к доставке
по всей Германии на заказы стоимостью свыше 0,- €
55000 товаров
Гарантия возврата денег
Политика возврата товара в течение 30 дней
В Вашей корзине находятся следующие товары
Готов к доставке
по всей Германии на заказы стоимостью свыше 0,- €
55000 товаров
Гарантия возврата денег
Политика возврата товара в течение 30 дней
The Dynacord SUB 112 800W Passive Subwoofer is built as a vented, direct radiating cabinet, equipped with a high-power neodymium transducer.
The Dynacord SUB 112 contains a passive filter, 6 dB/oct., that suppresses high frequencies. Appropriate fullrange cabinets can therefore be directly connected in parallel to the SUB 112 if an extended bass reproduction is required. You just have to connect the SUB 112 and the D 8 with a regular Speakon cable in parallel.
The conical vent system shows significantly less distortion and lower air noise at low frequencies than common circular vent openings. The SUB 112 cabinet is made of 15mm birch plywood. All corner joints and braces are grooved and glued. The cabinet´s surface is painted with a 2-K laquer finish . The acoustic foam front on a powder coated steel grille protects the woofer against damage during transport and bad environmental conditions.
The connector panel uses two 4-pole Speakon connectors (INPUT/THRU) for a safe connection and easy daisy-chaining to other cabinets. The pin assignment is 1+/1-. Pins 2+ and 2- are also connected between the two Speakon connectors. A pole-mount flange allows easy speaker-on-a-stick applications. The cabinet is equipped with four large rubber feet. Two handles allow easy and safe transport.
Dynacord SUB 112 main features include:
Dynacord D-Lite Sub 112 Passive Subwoofer
QSC E118sw (Black)
Electro Voice EKX-18S 18" Subwoofer
Electro Voice EKX-15S 15" Subwoofer
dB Technologies LVX PSW15