Обратная связь

Fostex HP-A3 Mk2

Товар: REC0016591-000
Включить поддержку социальных сетей
Compact headphone amplifier and D/A converter. Operation via USB-C, two inputs and outputs, suitable for high-impedance headphones  Вся информация о товаре

402,50 €
402,50 € / 1 STÜCK,  excl. НДС
Товар под заказ.Предполагаемая дата поставки на склад: 26.08.2026

Активируйте поддержку социальных сетей, для того чтобы делиться информацией о наших товарах. Размещение информации в социальных сетях будет производиться только с Вашего согласия.

Информация о продукте Fostex HP-A3 Mk2

Headphone amplifier and D/A converter

  • high-quality USB D/A converter and headphone amplifier
  • Suitable for high-impedance headphones
  • USB-C power supply gives the possibility for mobile use
  • high sampling rate thanks to selected "ESS Technology" DAC chip
  • Selected capacitors and op-amp for audio operation
  • Compact and robust housing
  • Accessories included:
    • 1x USB cable (Type-A - Type-C 1 m)
    • 4x rubber feet
    • instruction manual
Side view of the Fostex HP-A3 Mk2 headphone amplifier

Amplifying and converting

The Fostex HP-A3 Mk2 combines a headphone amplifier and a digital-to-analog converter in one machine. The device draws the required power via the USB-C connection, which also enables mobile use. The HP-A3 Mk2 is capable of converting optical digital audio signals and USB audio into analog signals and outputting them via the line output or the headphone output.

The sound quality has been significantly improved compared to the original model thanks to the new DAC chip. The chip now supports a sampling rate of 192 kHz at 24 bits, which results in fewer errors during the sampling process and optimizes the listening experience. To ensure that this sampling frequency works without problems, Fostex has redeveloped the analog circuitry and modified it in such a way that improved THD values and low noise are also achieved.

The headphone output gain of the HP-A3 Mk2 can be adjusted with the "HI/LO" switch, whereby the HI position increases the volume of the signal by 10dB more than the LO position. It is advisable to set the switch to "HI" if input signals with a low level are to be processed.

Technical data:

  • Power supply: USB
  • Power supply: PLL
  • DAC: max. 192 kHz, ES9016K2M DA chip (ESS Technology)
  • DAC chip: ES9016K2M
  • max. output: 100 / 20 mW (32 / 300 Ohm Output Load)
  • Compatibility: macOS 10.15+, Windows 10+
  • Frequency response: 20 Hz to 20 kHz (±0.3 dB)
  • THD: ≤ 0.03% (@ 32 Ohm Load, 1 kHz, 100 mW)


Manufacturer information
Mega Audio GmbH
Feldborn 3
55444 Waldlaubersheim
Germany
[email protected]
https://www.megaaudio.de/

Комплектность поставки:

  • incl. Accessories: Yes

Характеристики:

  • Manufacturer: Fostex
  • Colour: Black
  • Headphone inputs: 1
  • Headphone inputs symmetrical: 1
  • DAC: Yes
  • Application Area: Studio/Hi-Fi
  • Also for high Ohm headphones: Yes
  • Stereo output: 6.35mm jack, RCA, S/PDIF
  • Inputs digital: USB, S/PDIF (optic)
  • Wordclock In: No
  • Wordclock Out: No
  • Width (mm): 160
  • Depth (mm): 270
  • Height (mm): 70
  • incl. Accessories: Yes
Fostex HP-A3 Mk2 Изображение товараFostex HP-A3 Mk2
402,50 €
503,40 €
276,50 €
209,20 €

Сравнить с похожими товарами