MediaLas HyperPort Pro Interface USB-to-Laser/DMX Interface

The MediaLas HyperPort Pro is a standard interface, that comes with any Mamba Black or Mamba 2.0 package. It contains a fast ILDA interface with full RGB and blanking support, and a DMX interface with 512 DMX channels. 

The interface connects to the PC through standard USB, all outputs are buffered and protected against ESD and the internal double frame buffer eliminates latency delays, and increases the overall brightness of the laser projector, making this powerful interface the ideal choice over its competitors.

The main features of the HyperPort Pro include:

• Almost unlimited number of USB interfaces can be connected on your computer 
• This depends on the computer hardware 
• Each interface can be accessed independently from Mamba 
• Contrary to other USB interfaces, the HyperPort is fully hot plug´n´play 
• This means it can be disconnected or switched on and off during show playback, and will automatically integrate itself into Mamba after reconnecting 
• MediaLas recommends, to use 1 or 2 interfaces per USB port, although technically as many as desired can be connected through hubs 
• If more interfaces are connected, there could be a lower frame rate per interface 
• However this does not affect the actual output rate 
• Channels: XY, Blanking, RGB, DMX 
• Scan speed: up to approx. 100.000 pps 
• Hot Plug'n'Play 
• Resolution: XY: 12 bit; Blanking, RGB: 8 bit 
• DMX channels: 512 
• PC interface: USB 1.1 / 2.0